Centrifuge Maintenance Information

FLL-1500WZ Centrifuge Information about the main parameters of the device The user   The manufacturer John Finlay Model FLL-1500WZ Usage Dewater Series No FE02-24014 / JFE02-24015 Weight 11754 kg Basket Hefei John Finlay Mining Equipment Pty. Ltd. Equipment dimensions 3310mm * 3165mm * 2192mm Drive motors 75kW,380/660V,IP55,P6,3PH,50Hz vibration motor vibration motor     415 V, the vibration motor is 8.4 kW,IP65,P4,3PH,50Hz Lubricating machine 0.75kW,380/660V,IP55,P4,3PH,50Hz Cycle Contents Operation  Notes weekly Check the oil mark Routine inspection of oil quality Check the scale of the filter If necessary, it will be raised If necessary, replace it   Clean or replace the oil filter   Monthly “Y” filter Vibrating motors   Lubricating oil circuit and configuration Vibrating motors   Transmission belts cleanup Lubricate the motor – check the Condition of the stroke pointer Routine inspections, if necessary, repairs   Check that the M36 bolts on the two vibrating motors are No fastening Re-tensioning – every 3.5-5.1 kg force required 20mm bending.           Every 3 months Lubrication of Bearings on shafts Main bearings Replace the automatic oiler on the spindle bearing Check the adjusting bearings   Half year Bolts from the water tank to the sub-cube Shaft inlet part/polyurethane cover Check the condition, replace it if  it is old or deformed Check if necessary repairs Check the internal and external conditions    Basket replacement basket holder   The lining of the discharge section Infeed chute Check the condition, replace it if  it is old or deformed Check if necessary on repairs Check the internal and external conditions    Notes: Lubrication schedule Specification  Lubricating oil sepcification Lubricating oil quantity Hours 75KW driving motor,6 poles L-XBCHA3 45g 3000-4000 0.75KWLubricating machine,4poles N.A- -Pre-oiled and sealed     Vibrating motors LGHP2 High-temperature grease 60g 500 fuel tank: Refueling for the first time Refueling afterwards Shell  pressure-resistant S2-G100   38-40L   38-40L   500   2000 Spindle shaft oil seal   Automatic lubricator SL-01   3 months (adjustable) Precautions It is strictly forbidden to weld, cut and do other hot operations on the water tank body to prevent the tiles and wear-resistant mud from falling off. Before the operation of the equipment, the rotation direction of the vibration motor should be checked, and the rotation direction must be reversed. The basket should be cleaned before the operation of the equipment to prevent the basket or equipment from shaking

Centrifuge Maintenance Information Read More »